n order to ensure the normal work of the reducer, in addition to the normal operation of the operating procedures, the operation of the process of attention to normal monitoring and maintenance, but also should be regularly checked, do a good job of reducer maintenance, the following by small series for you to explain the daily maintenance of reducer.

1 、 wiping motor speed reducer. Remove dust and oil sludge outside the frame of motor reducer in time. If you use more dust in the environment, you'd better clean it once a day.

2. Check and wipe the motor reducer terminal. Check whether the terminal box connection screw is loose or burn.

3, check the fixed part of the screw, including the anchor screw, end cover screw, bearing cover screw, etc.. Tighten the loose nut.

4, check the drive device, check the pulley or coupling has no crack, damage, installation is firm; belt and the connecting tab is intact.

5, motor reducer boot device, but also a timely cleaning external dust and dirt, wipe contact, check the wiring is part of a burn mark, the grounding wire is good.